Can Shaw engineered hardwood floors be refinished?

It depends on the floor, and the good news is you may not need to. Shaw's finish is factory-applied and UV-cured, so these floors hold their look for years without refinishing. Minor scratches and dings can be handled with a color-matched touch-up or fill kit, which Shaw treats as normal upkeep. For deeper damage, individual planks may be replaceable without redoing the whole floor, depending on the product and its approved repair method. If replacement is permitted, keeping a carton or two from your original order can help provide a closer color and pattern match. Full sanding is possible on some products, depending on their construction, wear layer, and manufacturer instructions. As a general reference, a wear layer of roughly 3 mm or more may be needed to withstand sanding, but this should be confirmed against the specific product documentation. If the product specification lists the wear layer, that is the first place to look. A flooring professional can evaluate whether the available wear layer is sufficient for sanding and confirm your options before any work begins.

How do you clean Shaw engineered wood floors?

Vacuum or sweep regularly with a hard-floor attachment, using a brush or felt head rather than a beater bar. Blot spills as they happen with a soft, dry cloth. For periodic cleaning, apply Shaw's hard surface cleaner to a dry or terry cloth mop, and don't let excess product sit on the surface. Do not use wet mops, steam mops, ammonia, abrasive cleaners, oil-based wax, or polish.

How do you care for Shaw wood flooring?

Hold indoor relative humidity between 35% and 55% year-round, which minimizes the natural expansion and contraction of the wood. Some seasonal gapping is still normal and should be expected, so run a humidifier through dry heating months. Put walk-off mats at entries so grit gets caught before it reaches the floor. Place felt pads under furniture legs, wider pads under heavier pieces, and lift furniture rather than sliding it. Keep pet nails trimmed. Shaw's maintenance guidelines also note that warranties don't cover UV damage, so use blinds or drapes to limit direct sun exposure.

How can Shaw engineered flooring be installed?

Options include floating, glue-down, nail-down, or staple-down installation. Approved methods vary by product, but most Shaw engineered hardwood can be installed glue-down, nail-down, staple-down, or floating with a tongue-and-groove profile. Nail and staple fasten into a wood subfloor. Glue-down bonds the plank across its full underside and works over concrete, giving the most solid feel underfoot. The floating method must be glued at the joint with a tongue-and-groove adhesive, and floating is typically limited to thinner 5-ply products at least 3" wide. Always confirm the approved methods on the product page and review installation guide before you order.

Can I install Shaw engineered hardwood flooring myself?

Yes, if you have the tools on hand and the patience this job requires. If you're floating the floor, note that most Shaw engineered planks are tongue-and-groove rather than click-together, so you'll run adhesive along every joint and let it set before walking on it. Nail-down and staple-down need a pneumatic nailer and compressor. Glue-down needs the right trowel and a heavy roller. Whichever installation method you choose, start by testing your subfloor for moisture, and read the installation guide for your specific product first. Concrete subfloors, radiant heat, and damp spaces all have extra requirements worth checking before you start. If any of that gives you pause, hiring a professional installer is a sound decision.

How long should Shaw engineered hardwood acclimate before installation?

Plan for at least 48 hours. Shaw's engineered hardwood installation instructions call for acclimating the flooring in the space where it will be installed, and moisture readings should be taken both before and after that period. Jobsite conditions matter as much as the clock: Shaw requires permanent HVAC to be running for a minimum of five days beforehand, holding 65–75°F and 35–55% relative humidity before, during, and after installation. Cartons should be stored flat in the installation area, elevated off on-grade concrete for air circulation. Requirements can vary by collection, so check your product's installation guide — our specialists can confirm before you order.

Where can I buy Shaw engineered hardwood flooring?

You can buy Shaw engineered hardwood flooring online from Floor City, an authorized Shaw dealer that has supplied flooring since 1992 and ships eligible orders throughout the contiguous United States. Floor City offers Shaw engineered hardwood in oak, hickory, maple, birch, eucalyptus, and teak. You can compare available colors, textures, plank widths, thicknesses, and collections online, request free samples, and receive project quotes with recommended carton quantities, coordinating trims, current availability, and freight costs How to order flooring online at Floor City Why Order Shaw Hardwood From Floor City Authorized Shaw dealer. Guaranteed genuine Shaw material, and your order is registered with Shaw, so the manufacturer's warranty holds. Fast nationwide shipping or local pickup. Delivery comes to your address on a scheduled date, or you collect from the closest pick-up locations at your convenience. Competitive quoting. Choose the flooring you like, send your square footage, request a quote and a specialist comes back with the lowest quote for your room renovation or major home improvement project. Free samples . Order free samples to compare the wood grain and color in your own home.

#SW772-01150

Eclectic

Roll over image to zoom in Tap to zoom

Shaw Americana Oak SW772-01150 Eclectic 7" x Multi Length Engineered Hardwood

Shaw Americana Oak Eclectic engineered hardwood flooring photographed in a living room, pairing natural wood hardwood with the furniture layout.

Shaw Americana Oak SW772-01150 Eclectic 7" x Random Lengths up to 58.56" Engineered Hardwood (22.14 SF/Box)

Name: Shaw Americana Oak SW772-01150 Eclectic 7" x Random Lengths up to 58.56" Engineered Hardwood (22.14 SF/Box)
Brand: Shaw
SKU: SW772-01150
Price: 172.47 USD
Availability: InStock

SKU: SW772-01150

Size: 7" x Random Lengths up to 58.56"

Color: Eclectic

Variant

Price:

$172.47

Request a Quote

Est. Shipping (5-7 Business Days)

Available for Pickup

Enter Total Square Feet

1 box covers 22.14 SF

Total:

$172.47

Flexible Financing

Pay over time with Affirm or FlexPay see terms

Buy Now, Pay-Later!

Brand

Shaw

Style

SW772

Color Name

Eclectic

SKU #

SW772-01150

MPN #

SW772-01150

Size

7" x Random Lengths up to 58.56"

Coverage

22.14 SF / box

Type

Engineered Hardwood

Thickness

12.4 mm

Installation

Nail, Staple, Glue, Floating

Availability

In Stock

Warranty

5 Year Commercial Warranty

MAP Price

172.47

Wire-brushing opens up the surface of Shaw's Americana Oak collection, dragging along the grain to lift the softer growth rings while leaving the denser streaks standing slightly proud, a different effect from a flat, smooth-milled board. White oak's tight, straight grain and cool undertone hold steady under that texture, and Eclectic's coloring works with that coolness instead of fighting it, so the wood reads composed even with a textured surface. Knots and mineral streaking still surface across the field despite the tight grain white oak is known for, a result of the high character grading, worth expecting rather than treating as a defect. The Repel water-resistant finish caps gloss at 7%, keeping all of that texture matte rather than shiny.

Eclectic's cool, textured white oak suits a townhouse main floor finished with chestnut slab cabinetry nearby, a driftwood grey wall, and an end-grain walnut counter, with blackened steel hardware carrying the same dark, textured mood through the fixtures. Townhouse main floors tend to run long and narrow rather than open and square, and planks reaching up to 58.56 inches let a layout favor long, uninterrupted runs down that length rather than a stop-and-start pattern of shorter boards. Fewer seams along that long axis keep the eye traveling the full depth of the space instead of catching on a joint every few feet. A townhouse main floor like this is precisely the layout this Shaw engineered hardwood rewards.

Eclectic