Can Shaw engineered hardwood floors be refinished?

It depends on the floor, and the good news is you may not need to. Shaw's finish is factory-applied and UV-cured, so these floors hold their look for years without refinishing. Minor scratches and dings can be handled with a color-matched touch-up or fill kit, which Shaw treats as normal upkeep. For deeper damage, individual planks may be replaceable without redoing the whole floor, depending on the product and its approved repair method. If replacement is permitted, keeping a carton or two from your original order can help provide a closer color and pattern match. Full sanding is possible on some products, depending on their construction, wear layer, and manufacturer instructions. As a general reference, a wear layer of roughly 3 mm or more may be needed to withstand sanding, but this should be confirmed against the specific product documentation. If the product specification lists the wear layer, that is the first place to look. A flooring professional can evaluate whether the available wear layer is sufficient for sanding and confirm your options before any work begins.

How do you clean Shaw engineered wood floors?

Vacuum or sweep regularly with a hard-floor attachment, using a brush or felt head rather than a beater bar. Blot spills as they happen with a soft, dry cloth. For periodic cleaning, apply Shaw's hard surface cleaner to a dry or terry cloth mop, and don't let excess product sit on the surface. Do not use wet mops, steam mops, ammonia, abrasive cleaners, oil-based wax, or polish.

How do you care for Shaw wood flooring?

Hold indoor relative humidity between 35% and 55% year-round, which minimizes the natural expansion and contraction of the wood. Some seasonal gapping is still normal and should be expected, so run a humidifier through dry heating months. Put walk-off mats at entries so grit gets caught before it reaches the floor. Place felt pads under furniture legs, wider pads under heavier pieces, and lift furniture rather than sliding it. Keep pet nails trimmed. Shaw's maintenance guidelines also note that warranties don't cover UV damage, so use blinds or drapes to limit direct sun exposure.

How can Shaw engineered flooring be installed?

Options include floating, glue-down, nail-down, or staple-down installation. Approved methods vary by product, but most Shaw engineered hardwood can be installed glue-down, nail-down, staple-down, or floating with a tongue-and-groove profile. Nail and staple fasten into a wood subfloor. Glue-down bonds the plank across its full underside and works over concrete, giving the most solid feel underfoot. The floating method must be glued at the joint with a tongue-and-groove adhesive, and floating is typically limited to thinner 5-ply products at least 3" wide. Always confirm the approved methods on the product page and review installation guide before you order.

Can I install Shaw engineered hardwood flooring myself?

Yes, if you have the tools on hand and the patience this job requires. If you're floating the floor, note that most Shaw engineered planks are tongue-and-groove rather than click-together, so you'll run adhesive along every joint and let it set before walking on it. Nail-down and staple-down need a pneumatic nailer and compressor. Glue-down needs the right trowel and a heavy roller. Whichever installation method you choose, start by testing your subfloor for moisture, and read the installation guide for your specific product first. Concrete subfloors, radiant heat, and damp spaces all have extra requirements worth checking before you start. If any of that gives you pause, hiring a professional installer is a sound decision.

How long should Shaw engineered hardwood acclimate before installation?

Plan for at least 48 hours. Shaw's engineered hardwood installation instructions call for acclimating the flooring in the space where it will be installed, and moisture readings should be taken both before and after that period. Jobsite conditions matter as much as the clock: Shaw requires permanent HVAC to be running for a minimum of five days beforehand, holding 65–75°F and 35–55% relative humidity before, during, and after installation. Cartons should be stored flat in the installation area, elevated off on-grade concrete for air circulation. Requirements can vary by collection, so check your product's installation guide — our specialists can confirm before you order.

Where can I buy Shaw engineered hardwood flooring?

You can buy Shaw engineered hardwood flooring online from Floor City, an authorized Shaw dealer that has supplied flooring since 1992 and ships eligible orders throughout the contiguous United States. Floor City offers Shaw engineered hardwood in oak, hickory, maple, birch, eucalyptus, and teak. You can compare available colors, textures, plank widths, thicknesses, and collections online, request free samples, and receive project quotes with recommended carton quantities, coordinating trims, current availability, and freight costs How to order flooring online at Floor City Why Order Shaw Hardwood From Floor City Authorized Shaw dealer. Guaranteed genuine Shaw material, and your order is registered with Shaw, so the manufacturer's warranty holds. Fast nationwide shipping or local pickup. Delivery comes to your address on a scheduled date, or you collect from the closest pick-up locations at your convenience. Competitive quoting. Choose the flooring you like, send your square footage, request a quote and a specialist comes back with the lowest quote for your room renovation or major home improvement project. Free samples . Order free samples to compare the wood grain and color in your own home.

#SW582-00135

Rustic Natural

Roll over image to zoom in Tap to zoom View Accessories

Shaw Albright Oak 5" SW582-00135 Rustic Natural

Shaw Albright Oak 5.0 Rustic Natural engineered hardwood flooring shown across a living room, highlighting a natural oak hardwood look.

Shaw Albright Oak 5 Rustic Natural SW582-00135 5" x Multi

Shaw Albright Oak 5 Rustic Natural SW582-00135 5" x Random Lengths up to 58.5" (23.66 SF/Box)

Name: Shaw Albright Oak 5 Rustic Natural SW582-00135 5" x Random Lengths up to 58.5" (23.66 SF/Box)
Brand: Shaw
SKU: SW582-00135
Price: 141.72 USD
Availability: InStock

SKU: SW582-00135

Size: 5" x Random Lengths up to 58.5"

Color: Rustic Natural

Variant

Price:

$141.72

Request a Quote

Est. Shipping (5-7 Business Days)

Available for Pickup

Enter Total Square Feet

1 box covers 23.66 SF

Total:

$141.72

View Accessories

Flexible Financing

Pay over time with Affirm or FlexPay see terms

Buy Now, Pay-Later!

Brand

Shaw

Style

SW582

Color Name

Rustic Natural

SKU #

SW582-00135

MPN #

SW582-00135

Size

5" x Random Lengths up to 58.5"

Coverage

23.66 SF / box

Type

Engineered Hardwood

Thickness

8.2 mm

Installation

Nail, Staple, Glue, Float

Availability

In Stock

Warranty

5 Year

MAP Price

141.72

Rustic Natural earns its name from a High character rating, so this run carries real knots, mineral streaking and visible sapwood rather than a clean, matched grade. Red oak's open grain and a naturally warm, faintly pink cast give that character somewhere to show, since the wood is already busier than a tight, straight-grained species allows. The stain stays close to the wood's own tone rather than pushing it darker or grayer, so the open pore, the pink-leaning undertone and the character marks all sit near the surface, visible instead of buried under pigment, which is really what the name is describing. The smooth surface leaves that texture and grain fully exposed rather than softening it.

Plain-sawn cherry cabinetry, smoke grey walls, basalt surfaces and stainless hardware round out a palette that leans into Rustic Natural's warm tone in the kind of entry and hallway run that takes more foot traffic and grit than almost any other space in a house. This Shaw Albright Oak floor accepts nail, staple, glue or floating installation, with a grade rated for above, on and below grade use. That below-grade rating matters for an entry sitting over a concrete slab, since this engineered hardwood can be glued or floated onto that slab rather than needing a raised subfloor. For a ground-level entry in a slab home, that flexibility is often the deciding factor.

Shaw Hardwood Flooring T-Molding Trim Piece

Shaw -- Hardwood T-Molding Trim 78" pc. Coordinated Color

To be quoted

Shaw Hardwood Flooring Threshold Trim Piece

Shaw -- Hardwood Threshold Trim 78" pc. Coordinated Color

To be quoted

Shaw -- Hardwood Reducer Trim 78" pc. Coordinated Color

To be quoted

Shaw Hardwood Flooring Quarter Round Trim Piece

Shaw -- Hardwood Quarter Round 78" pc. Coordinated Color

To be quoted

Shaw -- Hardwood Flush Stair Nose 78" pc. Coordinated Color

To be quoted

Shaw -- Hardwood Overlap Stair Nose 78" pc. Coordinated Color

To be quoted

Shaw -- Shaw Hardwood UREBOND Enhanced Adhesive 163SM 4 Gallon (240 SF)

To be quoted

Shaw - Shaw Stair Riser LVWRI-00001 White 7.50" x 48" (3 pcs./carton)

To be quoted

Shaw -- Hardwood T-Molding Trim 78" pc. Coordinated Color

To be quoted

Shaw -- Hardwood Threshold Trim 78" pc. Coordinated Color

To be quoted

Shaw -- Hardwood Reducer Trim 78" pc. Coordinated Color

To be quoted

Shaw -- Hardwood Quarter Round 78" pc. Coordinated Color

To be quoted

Shaw -- Hardwood Flush Stair Nose 78" pc. Coordinated Color

To be quoted

Shaw -- Hardwood Overlap Stair Nose 78" pc. Coordinated Color

To be quoted

Shaw -- Shaw Hardwood UREBOND Enhanced Adhesive 163SM 4 Gallon (240 SF)

To be quoted

Shaw - Shaw Stair Riser LVWRI-00001 White 7.50" x 48" (3 pcs./carton)

To be quoted

Rustic Natural