Forbo V-1190 is a high-performance, solvent-free acrylic adhesive specifically formulated for Forbo Flotex, Sphera, and Allura Decibel. It provides an extremely secure, moisture-resistant bond with high shear strength. This zero-VOC formula is ideal for environmentally sensitive projects and can be installed on concrete that is above, on and below grade, APA approved plywood, and underlayment-grade hardboard.
Product Specifications
Covers 500–1,200 SF per 4 Gallon Pail
"Zero" (calculated) VOC, Very Low Odor
Available in 4 gallon pails
Solvent Free, FloorScore® Certified
Meets requirements of CA Sec 01350 IAQ
Moisture tolerance - 90% RH / 8.0 lbs. MVER
pH Range: 7.0–11.0
Non-Staining Formula
Spread Rates & Trowel Requirements
Permanent (Standard): 1/16" x 1/16" x 1/16" Square Notch - 500 SF / 4 Gal
Permanent (Fine): 1/32" x 1/16" x 1/32" Fine Notch - 700 SF / 4 Gal
Releasable (Roller): 3/8" Nap Roller - 1,200 SF / 4 Gal
Installation Instructions
Permanent Installation: When installing Sphera, Eternal, or Flotex for a permanent bond, allow adhesive to develop body (10–20 minutes). Material must be placed into wet adhesive to ensure 100% transfer. Do not allow adhesive to dry. Roll in both directions with a 100 lb. roller immediately after placement.
Releasable Installation: For modular products like Flotex Planks or Tiles, apply with a roller and allow to turn completely clear and dry to the touch (30–60 minutes). Once clear, install flooring within the 4-hour working time. Roll in both directions with a 100 lb. roller.