Can Shaw engineered hardwood floors be refinished?

It depends on the floor, and the good news is you may not need to. Shaw's finish is factory-applied and UV-cured, so these floors hold their look for years without refinishing. Minor scratches and dings can be handled with a color-matched touch-up or fill kit, which Shaw treats as normal upkeep. For deeper damage, individual planks may be replaceable without redoing the whole floor, depending on the product and its approved repair method. If replacement is permitted, keeping a carton or two from your original order can help provide a closer color and pattern match. Full sanding is possible on some products, depending on their construction, wear layer, and manufacturer instructions. As a general reference, a wear layer of roughly 3 mm or more may be needed to withstand sanding, but this should be confirmed against the specific product documentation. If the product specification lists the wear layer, that is the first place to look. A flooring professional can evaluate whether the available wear layer is sufficient for sanding and confirm your options before any work begins.

How do you clean Shaw engineered wood floors?

Vacuum or sweep regularly with a hard-floor attachment, using a brush or felt head rather than a beater bar. Blot spills as they happen with a soft, dry cloth. For periodic cleaning, apply Shaw's hard surface cleaner to a dry or terry cloth mop, and don't let excess product sit on the surface. Do not use wet mops, steam mops, ammonia, abrasive cleaners, oil-based wax, or polish.

How do you care for Shaw wood flooring?

Hold indoor relative humidity between 35% and 55% year-round, which minimizes the natural expansion and contraction of the wood. Some seasonal gapping is still normal and should be expected, so run a humidifier through dry heating months. Put walk-off mats at entries so grit gets caught before it reaches the floor. Place felt pads under furniture legs, wider pads under heavier pieces, and lift furniture rather than sliding it. Keep pet nails trimmed. Shaw's maintenance guidelines also note that warranties don't cover UV damage, so use blinds or drapes to limit direct sun exposure.

How can Shaw engineered flooring be installed?

Options include floating, glue-down, nail-down, or staple-down installation. Approved methods vary by product, but most Shaw engineered hardwood can be installed glue-down, nail-down, staple-down, or floating with a tongue-and-groove profile. Nail and staple fasten into a wood subfloor. Glue-down bonds the plank across its full underside and works over concrete, giving the most solid feel underfoot. The floating method must be glued at the joint with a tongue-and-groove adhesive, and floating is typically limited to thinner 5-ply products at least 3" wide. Always confirm the approved methods on the product page and review installation guide before you order.

Can I install Shaw engineered hardwood flooring myself?

Yes, if you have the tools on hand and the patience this job requires. If you're floating the floor, note that most Shaw engineered planks are tongue-and-groove rather than click-together, so you'll run adhesive along every joint and let it set before walking on it. Nail-down and staple-down need a pneumatic nailer and compressor. Glue-down needs the right trowel and a heavy roller. Whichever installation method you choose, start by testing your subfloor for moisture, and read the installation guide for your specific product first. Concrete subfloors, radiant heat, and damp spaces all have extra requirements worth checking before you start. If any of that gives you pause, hiring a professional installer is a sound decision.

How long should Shaw engineered hardwood acclimate before installation?

Plan for at least 48 hours. Shaw's engineered hardwood installation instructions call for acclimating the flooring in the space where it will be installed, and moisture readings should be taken both before and after that period. Jobsite conditions matter as much as the clock: Shaw requires permanent HVAC to be running for a minimum of five days beforehand, holding 65–75°F and 35–55% relative humidity before, during, and after installation. Cartons should be stored flat in the installation area, elevated off on-grade concrete for air circulation. Requirements can vary by collection, so check your product's installation guide — our specialists can confirm before you order.

Where can I buy Shaw engineered hardwood flooring?

You can buy Shaw engineered hardwood flooring online from Floor City, an authorized Shaw dealer that has supplied flooring since 1992 and ships eligible orders throughout the contiguous United States. Floor City offers Shaw engineered hardwood in oak, hickory, maple, birch, eucalyptus, and teak. You can compare available colors, textures, plank widths, thicknesses, and collections online, request free samples, and receive project quotes with recommended carton quantities, coordinating trims, current availability, and freight costs How to order flooring online at Floor City Why Order Shaw Hardwood From Floor City Authorized Shaw dealer. Guaranteed genuine Shaw material, and your order is registered with Shaw, so the manufacturer's warranty holds. Fast nationwide shipping or local pickup. Delivery comes to your address on a scheduled date, or you collect from the closest pick-up locations at your convenience. Competitive quoting. Choose the flooring you like, send your square footage, request a quote and a specialist comes back with the lowest quote for your room renovation or major home improvement project. Free samples . Order free samples to compare the wood grain and color in your own home.

#SW789-01175

Sun Glow

Roll over image to zoom in Tap to zoom

Shaw Cornerstone II SW789-01175 Sun Glow 7.48" x Random Lengths up to 74.8" Engineered Hardwood

Shaw Cornerstone II Sun Glow engineered hardwood flooring gives this living room a polished look, with natural wood color around sofa seating and the open floor area.

Shaw Cornerstone II SW789-01175 Sun Glow 7.48" x Random Lengths up to 74.8" Engineered Hardwood (38.86 SF/Box)

Name: Shaw Cornerstone II SW789-01175 Sun Glow 7.48" x Random Lengths up to 74.8" Engineered Hardwood (38.86 SF/Box)
Brand: Shaw
SKU: SW789-01175
Price: 294.95 USD
Availability: InStock

SKU: SW789-01175

Color: Sun Glow

Size: 7.48" x Random Lengths Up to 74.8"

Variant

Price:

$294.95

Request a Quote

Est. Shipping (5-7 Business Days)

Available for Pickup

Enter Total Square Feet

1 box covers 38.86 SF

Total:

$294.95

Flexible Financing

Pay over time with Affirm or FlexPay see terms

Buy Now, Pay-Later!

Brand

Shaw

Style

SW789

Color Name

Sun Glow

SKU #

SW789-01175

Size

7.48" x Random Lengths Up to 74.8"

Coverage

38.86 SF / box

Type

Engineered Hardwood

Thickness

3/8"

Installation

Nail, Staple, Glue, Floating

Availability

In Stock

Warranty

50-Year Shaw Hardwood Limited Residential, 5-Year Commercial

MAP Price

294.95

Sun Glow's planks, part of Shaw's Cornerstone II line, measure 7.48 inches wide and stretch from just under 16 inches to nearly 75 inches long. That's a long format. It lets white oak's tight, straight grain run in visible lines rather than breaking up every couple of feet, and that length range does real work: boards this long reduce how often a seam interrupts the grain, which matters on a species known for a cooler, more linear look than hickory or red oak. A High rating on the character scale still allows genuine knots and mineral streaking against that calmer backdrop. Wire-brushing and a 7% gloss finish keep this engineered hardwood's surface textural without turning shiny.

A den finished with honed soapstone-topped cabinetry, mushroom-colored walls, a porcelain slab counter and burnished gold hardware gives Sun Glow's cool white oak tone a settled, library-adjacent feel rather than a bright or busy one. Sun Glow's UV-cured aluminum oxide topcoat handles the kind of wear a den actually sees: a rolling desk chair dragged across the same six feet of floor for years, a dropped glass of whiskey by the soapstone-topped bar cart, a dog's claws pacing the same path daily. None of that requires sanding the floor to fix. It's the kind of daily abrasion the finish is built to absorb quietly.

Sun Glow